How Often Should I Change My HVAC Filter?

By Maverick Mechanical Heating and Air · Updated

The short answer

Change a standard 1-inch HVAC filter every 1 to 3 months, and check it monthly during heavy cooling and heating seasons. Thicker 4- to 5-inch media filters usually last 6 to 12 months. Change filters more often if you have pets, allergies or a lot of dust, or if the system runs nonstop through a Georgia summer.

How often, by filter type

  • 1-inch pleated filters: every 1 to 3 months. Check monthly in summer and winter.
  • 4- to 5-inch media filters (in a cabinet at the furnace or air handler): usually every 6 to 12 months; follow the manufacturer's guidance.
  • Washable filters: rinse and fully dry them on the same 1- to 3-month schedule.
  • Change sooner with pets, allergies or asthma at home, after renovation or construction, or when the system runs constantly in peak season.

How to change it

  1. Turn the system off at the thermostat.
  2. Find the filter: behind a return grille in a wall or ceiling, or in a slot at the furnace or air handler.
  3. Note the size printed on the frame (for example 16x25x1) and buy the same size.
  4. Slide the new filter in with the airflow arrow pointing toward the furnace or air handler, away from the return grille.
  5. Close the grille or cover and turn the system back on.

Which filter rating should I buy?

Filters are rated by MERV (Minimum Efficiency Reporting Value). Higher numbers catch smaller particles, but they also restrict more air. For most homes a MERV 8 to 11 filter is a good balance. Very high-MERV filters can choke airflow in systems that weren't designed for them, which can freeze AC coils or overheat furnaces. If you want better filtration for allergies, ask about a media filter cabinet sized for your system.

What happens if you don't change it

  • Higher energy bills, because the blower works harder.
  • A frozen AC coil in summer.
  • A furnace that overheats and shuts itself off in winter.
  • Dirtier coils and ducts, and dustier air.
  • Shorter equipment life.

When to call a technician

  • You can't find the filter, or there's more than one and you aren't sure which to change
  • The filter slot or cabinet is damaged so air bypasses the filter
  • A new filter gets dirty within a couple of weeks (a sign of duct leaks or other problems)
  • You want higher filtration and need to know what your system can handle

Maverick Mechanical serves homeowners across North Atlanta, GA. Call (770)579-9172 and we'll diagnose it properly and explain your options before any work starts.

Related Questions

Does a more expensive filter mean better air?

Not always. A higher MERV rating catches smaller particles, but if it restricts airflow too much it can cause other problems. For most homes a MERV 8 to 11 pleated filter changed on schedule works well.

Which way does the arrow on the filter go?

The arrow shows the direction of airflow. Point it toward the furnace or air handler, away from the return grille where air enters.

Do you change the filter during a maintenance visit?

Yes. Filter replacement is part of every HVAC maintenance visit, and we can recommend the right size, rating and schedule for your home.

Call now(770)579-9172

Maverick Mechanical

How can we help you?

Hi there! 👋 We're here to help with all your HVAC needs. Whether you need AC repair, heating service, or just have questions - we're ready to assist!